how to use dyson vacuum?

Now that you have purchased or thinking to purchase a Dyson vacuum, there would be a question in your mind. It would be how to use the Dyson vacuum. Fear not, you are in the right place to get the relevant tips and tricks:

Search Online

The first thing that you should after buying the Dyson vacuum is search online for all the relevant and required information. There are online tutorials, articles, and so much more that you easily access. You can visit the official website of the vacuum cleaner and read on for more information. The online tutorials provide you an informative video on how to use a certain product or service. You can easily grab the relevant video and solve your issue. You can also read the articles if you are fond of reading rather than following the visual step by step instruction.

Ask Someone for Help

In order to learn to use the Dyson vacuum, it would be a good idea to ask someone for help. It should be someone who already owns such a vacuum. This person would become your best guide and you can learn the tips and tricks of using this particular vacuum. It is always better to ask someone you are comfortable with. It could be a friend or family member.

Post Query on Social Media

If there is one particular aspect that you find difficult, you can create a query on social media. You can ask people who already own this type of vacuum about the particular aspect. There are many Dyson attachments and you might have no idea how to use a particular one, which is why it is always better to ask. Asking questions is the best solution to many problems.

Read the Manual

Some people might ignore this part. However, every product comes with a manual that can help in understanding how it works. It is wise to go through the manual thoroughly. With technological advancement, you can search for the manual online as well.

Ask the Customer Service

If you think that there is some problem with your vacuum cleaner, it would be a good idea to ask the customer service. Customer service can guide you. However, you have to search whether there is customer support for the relevant product or not. In this case, you can visit the official website of the Dyson vacuum cleaner. Reading the product description would also give a brief idea.

Final Words

Technological advancement has brought a variety of changes in our life. We are living in an era of modernization and information technology. Gone are the days when people would be cleaning up their house using the traditional mops and sweep. Now, there are advanced technological products, for example, a vacuum cleaner to make life easier. It would clean up the house and make it spotless. It is a blessing to have such products in life. But, sometimes it is quite tough to understand how to use it. The best part is the availability of information. There is tons of information available online in the form of tutorials, articles, and you can even create social media posts for more information.

how to DIY vacuum cleaner?

Vacuum cleaners come in so handy when cleaning almost everything in our homes and offices. But do you really know how your vacuum cleaner works? Well, one thing that might surprise you before we even go further is that vacuum cleaners don’t work by creating a vacuum.

That’d be quite difficult to do. If you want to understand that better, you can get a syringe, put a cap on it having removed the needle, and then try to pull the plunger back. That’s how hard it’d be to try and create a vacuum to suck the dust.

A vacuum cleaner, however, uses a concept quite similar to creating a vacuum. It blows air outside to create a region of low pressure which causes high-pressure air from outside to rush into the vacuum cleaner creating what seems like a suction force. This is the main concept you want to have in mind when making a DIY vacuum cleaner.

Materials required

The main things you need when making a DIY vacuum cleaner at home include:1. Plastic bottle 2. DC motor3. Plastic handle4. Aluminum sheet 5. A power source (battery or power bank) 6. Net fabric 7. Small pipe8. Cardboard sheet9. Cutter 10. Marking pen11. Glue gun  12. Scissor

Step 1: Cutting the bottle once you have everything, get the bottle and cut it almost halfway from the base. This will make it easier for you to fit the motor, fan, and filter insider the bottle.

Step 2: Make a fan Get an aluminum sheet (You can cut one from a deodorant bottle), and place the plastic bottle you cut earlier on it. Sketch the plastic bottle’s circumference on the aluminum sheet using a marker pen. You can then cut the aluminum piece following the marking to create a round disc. Using a ruler, draw four complete vertical lines on the aluminum disc to divide it into eight equal parts that should meet at the center. Make a small hole at the center, then cut through the vertical lines using your pair of scissors. Once you have the sections, twist them in one direction in a way similar to how fans are twisted.

Step 4: Attach the fan to the motor get the cap of the plastic bottle and make a small hole at the center. Take the motor (12 DC should be perfect), and then attach the cap behind it using glue from the heat gun. The wires from the motor should go through the hole at the center of the cap. Once ready, secure the fan onto the motor’s shaft using glue. It should be ready to rotate.

Step 5:  Make exhaust holes with the help of a hot soldering iron or drill machine, make some exhaust holes at the bottom of the plastic bottle to facilitate the escape of exhaust air.

Step 6: Secure the fan onto the bottle Put some glue at the back of the plastic cap and then attach the cap to the bottom of the bottle. Get the wire of out the bottle from one of the small exhaust holes.

Step 7: Make a filter Measure the inner diameter of the plastic bottle and cut out a ring from the cardboard sheet. Stick a piece of fabric to fit the ring using some glue. You can then attach the filter onto the plastic using some double-sided tape so that it captures dust particles preventing them from being sucked out of the plastic bottle.

Step 8: Fit a suction pipe The suction pipe you attach to your vacuum cleaner should be of average length to enhance sufficient suction. The pipe should have a diameter same as that of the bottle top, and should also have a nozzle (You can make this by cutting the top of a plastic box). The difference in surface area between the nozzle and pipe helps increase suction.

Step 9: Power the vacuum Get a power bank of a battery pack you’ve made and connect it to a switch which should link the motor to the power source. You can attach the switch to the handle using glue from the hot glue gun, and then secure the handle onto the bottle using glue as well. You should also secure the battery pack onto the plastic bottle using glue for a compact vacuum cleaner. Once everything is ready, join the two parts of the bottle using duct tape or any other strong tape.

Step 10: Test the vacuum cleaner After you’re done, the vacuum cleaner should be ready to test. All you have to do is switch on the power to facilitate rotation of the fan. Once rotating, try out your vacuum cleaner to confirm that it actually can collect dirt particles. If it’s collecting dust, you’ve successfully made yourself a functional vacuum cleaner.

how to clean dyson vacuum?

Do you know that this vacuum cleaner will build up dirt over time? It will lose some of its suction after subsequent use. Moisture and particles of fiber are some of the inevitable substances that make the suction to corrode. With that in mind, you should clean your vacuum regularly. In fact, you should take it as a maintenance schedule. This will make it last for years. Here are some of the supplies you should use in your cleaning process. They will make cleaning easier and enjoyable.

  • Rubbing alcohol.
  • Magic Eraser.
  • Air Compressor.
  • Seam Ripper.
  • Mild detergent.

As long as you follow this procedure, your vacuum will last longer even beyond your expectations.


This is arguably the first step you should never ignore. How do you clean the canister? It all starts by pushing the button between the red pieces. This will ensure that the outer shell has completely been removed from the cyclone. You should consider throwing the debris in the trash. The process will not be complete if you don’t take the canister to your sink. How do you wash the canister? It is very easy. All that you need to do in that case is to wash it with cold water and cloth. What if your canister is extremely dirty? Use mild dish soap.


What is the best way to clean cyclone? Over the years, using an air compressor and blow dryer have proved to be the most effective ways when it comes to cleaning cyclone. How do you prepare? Take your cyclone and go into an open area. Use your tool to remove dirt particles from each hole. A wet cloth will be best to clean the case.


In most cases, vacuums come with two filters. Therefore you have to take care of both when cleaning your vacuum. You can easily remove both filters from the side by simply popping them out. You should only use cold water when cleaning the filters. Each filter should be dipped in a can of cool water. The number of times mainly depend on how dirty they are.


Are you sure that your roller can end up with tangled hair? It might be a hard task cleaning the roller. Disconnect the soleplate. Your vacuum should be upside down when doing this. You can use a pair of scissors or even a seam ripper to remove away any hair that is blocking the roller. At the same time, you can check whether the belt is functioning properly. You can replace it if it is worn out.


The first thing you should do is disconnecting it from the wand. How can you do this? Pushing the small red side has proved to be the easiest way to release it. Also, carefully slide the plastic U-bend. The hose will be disconnected from the machine. It is good to know that the hose is as straight as you can get it.

what is a sister wife?

In a polyamorous marriage where at least 2 women are involved, each wife is a sister wife to each other. Couples are always looking for new things to try, and attracting a new family member is still an option. But what if you’re not a kid and you’re more interested in adults? Are you looking for a sister wife? Do you want to expand your family and looking for a sister wife to complete your life?

Most couples consider having a child to develop their families. This is the choice that will make them feel perfect, and that’s what both will contribute to. But what if you’re already a parent? What if you’re looking for a new solution for him, and you’re not willing to make an effort to help a new baby grow?

Engaging an adult in the family is not easy. There are a few things you should think about from the start, and you should take all the time to weigh each. This is the person who will be with you for the rest of his life, so you should be sure that you will not make a hasty decision, and you will regret it later.

This is one reason why you should focus on how you can make the right choice from the start. You’ll need to set a few criteria when it comes to the member you want to add to the family. This will make your choice much more comfortable, and you will be able to make a faster decision. But what criteria do you need to focus on?

The new addition to the family is meant to be completed, and you’ll need to find the person who will receive the necessary reward. You should be sure that her personality will be compatible with existing members. It may be the missing link that will make you feel much better thanks to the joy, love, support, or maturity you add to the family.

Another aspect you should think about is the lifestyle you already have and how the new member will fit. This is important because you should make sure that the new member will not cause several problems between the current members. No matter what you choose, you should know that in the end, you can still achieve your goals.

Change is not always bad, and this will always lead to the search for a sister-in-law for marriage. You must remain neutral and adapt to your new situation. All parties involved in this must do the same. You should find an answer that gives the right amount of satisfaction to all parties involved.

One of the things to keep in mind is that you are looking for a sister-in-law to add to the family and spend the rest of your life together. This is a long time, and you have to learn that in the end, it is not the wrong choice. That’s why you should be open and honest, and you should focus on the details that will help you find the right participant.

You should not hide what you are looking for in the person you want to join. You should be open when it comes to your goals, actions, and expectations. You should share your point of view from the beginning to get rid of any issues you may encounter later. The more you participate, the more confident you will be.

Another aspect you should focus on is what you are willing to do to make the new member feel welcome. You must make many sacrifices to achieve your goal, and you must be explicit about this. It will be much easier to show your commitment to this if you’re ready to do your part. This is an aspect you should focus on from the beginning, so you can be sure that the result you got at the end is the one you were thinking about.

why does my wife hate me?

If your marriage is devastating and your wife no longer resembles the one you married, you might ask, “Why do you hate my wife?” This is a terrible feeling when the marriage breaks down, and you feel unable to get something. To do that. Women can be tough for men to understand, especially in matters of love and marriage. No matter what your wife does or what you feel now, you can save your marriage, even if you’re the only person trying. Let me tell you how.

First of all, you need to know the reason for your marriage in the first place. Marriage usually occurs because the couple together creates an environment in which they enjoy. They love her; they want to be always. What happens when this environment changes for one partner? This is what most likely happened to your wife. Her something has evolved in the background, and now she feels different. She may not be able to put her finger on her, but something is wrong. Confusion and/or disappointment may make her think she hates you but is unlikely to do so.

Thus, the task of marriage now is to either restore the environment that attracted you or re-create a new environment that will be equal or even more attractive. The second scenario is likely because couples always grow in relationships. It may be positive or negative, but some growth occurs. So, most likely, the environment you create with your wife will be new and even better than anything you’ve ever thought of! This is quite possible, also if you’re the only one trying.

Some things will be needed. First, you must be calm, confident, and not confrontational. Secondly, you should devote yourself 100% to maintaining a marriage, no matter what your wife does or doesn’t do. Third, you should be prepared to follow a plan that may seem strange but trust this process. Finally, you should be ready to take action without delay. The faster you act, the higher your chance of success! This plan succeeded not only in my marriage but also in the marriage of many other couples, even when all hope seemed lost.

If she tells you she hates you, don’t take her yet. Husbands and wives must live as one, right? Together until the end. Maybe she will have to disappoint her on some, and unfortunately, you feel you are the only one who can do this with him.

You may feel you don’t like him. You may feel unloved or undesirable. Show her that you love her. You should show her as well as tell her. Show her that you love her shouldn’t cost anything. The best way to show your wife that you love her is to do her little things. Help her with housework or errands, these trivialities.

When you do something for her or with her, you’ll see that you appreciate her. You’ll start feeling love again, and you’ll know that she still really loves you.